EasyLift Magnetic Lifter
Smaller - Stronger - Sturdier - Safer
FEATURES :
- Containing rare earth magnet significantly more powerful than ferrite.
- Bi-polar structure ergonomically suitable for round work-pieces.
- 5 models for flat plate and 4 models for flat and round work-pieces.
- Minimised kicking force during switch handle turn-off process.
- Economical design, offsetting the high cost of rare earth magnet.
|
Model Type |
Dimensions mm |
Capacity kg with 3 :1 Safety Factor |
Weight kg |
||||
|
|
Width |
Length w/switch |
Height w/eyebolt |
Flat 25mm Plate |
Round |
Diameter mm |
|
|
KRE-15(1) |
102 |
85/102 |
119/179 |
150 |
- |
- |
7 |
|
KRE-30(2) |
154 |
95/127 |
119/179 |
300 |
- |
- |
14 |
|
KRE-50(3) |
184 |
115/147 |
149/220 |
500 |
- |
- |
21 |
|
KRE-80(4) |
242 |
115/157 |
175/265 |
800 |
- |
- |
35 |
|
KRE-100(5) |
263 |
115/157 |
199/309 |
1000 |
- |
- |
44 |
|
KRE-25/20(6) |
154 |
115/147 |
119/179 |
250 |
200 |
160-200 |
15 |
|
KRE-45/30(7) |
184 |
135/167 |
149/220 |
450 |
300 |
160-250 |
25 |
|
KRE-75/50(8) |
242` |
135/177 |
175/265 |
750 |
500 |
200-400 |
40 |
|
KRE-95/70(9) |
263 |
135/177 |
199/309 |
950 |
700 |
250-400 |
50 |
Note:
Holding Base + Material: SS400, Thickness: 25mm, Face Roughness: Safety Factor = 3 : 1 (Holding Power)
- Models (1) through (5) are for flat work pieces and models (6) through (9) for either flat or round work-pieces.
- The switch handle of the KRE-15 turns 90 degrees, all other models turn 180 degrees.
- As to the flat/round models, the ratio of adhesive force for flat work-piece to that for round one ranges 3 : 2 to 5 : 4.
- The adhesive force for round work-pieces vary according to the diameter of the work-piece.
- The capacity in the table is based upon 3 : 1 safety factor, it is approximately one third of actual adhesive force.
